isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200msp1t2b3m1qeh 2:1 8/9/2007 ST211115 b bf 1 1 panel mounting without locking ring with locking ring 5.59 [.220 in] 8.13 [.320 in] 5.08 [.200 in] n 6.00 [.236 in] 25 ~ pos. 3 pos. 1 5.33 [.210 in] 2.54 [.100 in] n 2 13 pos. 1 pos. 2 pos. 3 switch function none on on 2-3 n/a 2-1 b 17546 revised and redrawn 8/9/07 bf note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 3 amps @ 120vac or 28vdc ul, cul 1 amps @ 250vac ul, cul 6. electric life: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) complaint 12. hardware to be shipped bulk t200015 - hexnut - qty 2 t200000 - lockwasher - qty 1 t200003 - lockring - qty 1 circuit: spdt 1 2 3 1 keyway 8.64 [.340 in] .70 [.028 in] .38 [.015 in] 10-48 uns-2a epoxy seal 2.54 [.100 in] .51 [.020 in] 2.80 [.110 in] 4.06 [.160 in] 1.52 [.060 in] .76 [.030 in] 4.06 [.160 in] 2.80 [.110 in] 1.53 [.060 in] n 4.95 n .195 0.25 .010 .58 [.023 in] n 4.95 [.195 in] n 2.38 [.094 in] 6.10 [.240 in]
|